How RS1 Works

How The RS1 Particle Mask Works By SAMGO1 LLC

Air is inhaled through a circuit bacterial filter and then exhaled air flows once again through the bacteria circuit filter into the ambient atmosphere, minimizing exposure to both you and the atmosphere from particulate and microbial contamination.

Particulates and microbial contamination are quarantined inside the plastic housing of the circuit bacterial filter.It’s easier to breathe through compared to a traditional fabric surgical mask and a N95 mask. RS1 mask have a Delta-P reading of 0.8.

INTENDED USAGE: Help protect the wearer against inhaling airborne particulates. 


BENEFITS: Reusable ---- Increased ProtectionMask will protect mouth and nose entry openings from spit, blood, body fluids.Tested to filter down to a 0.1 (0.097 + 0.003) micron size @ 99.99% efficiency.


MAINTENANCE: At end of each use, wipe clean inside & outside of mask with a 70% alcohol pad and let dry.NOTE: Do not attempt to clean filter media. Replace when needed.


WARNINGS: Replace filter if breathing becomes more difficult from prior usages. This mask should not be used for toxic air contaminants such as toxic gases, fumes and vapors. Adult supervision required for children. Requires 19.5% oxygen atmospheres. It’s a violation of Federal Law to use this product other than its intended usage.


SEAL CHECK METHOD:To test seal between face and mask, place both palms of your hand over filter opening to check for air tightness and make mask adjustments to mask if needed, for maximum air tightness. The more you seal check the more it will increase your assurance of air tightness.


DIRECTIONS FOR USE: Place mask on face with elastic strap over the ears and around the neck. Gently pull the ends of the straps until the mask is secure. (Filter will only fit one way)


FILTER AND MASK INFORMATION: Filters meet FDA 510K Approval. Masks meet FDA Approval a N95 mask has an approximate shelf life of 3 years.